clamps › loop clamps
S280D7
Clamp
Description
Diameter: 13/64", plastic polytetrafluoroethylene cushion
Specifications
| Center To Center Distance Between Loop And Mounting Hole | 0.560 |
|---|---|
| Cushioning Environmental Protection | Any acceptable |
| Diameter | 0.201 inches minimum and 0.209 inches maximum |
| Distance From Loop Center To Tongue End | 0.748 |
| Loop Inside Diameter | 0.438 |
| Material | Aluminum |
| Material Specification | Qq-a-s250/5 t4 fed spec single material response band |
| Material Thickness | 0.029 inches minimum and 0.035 inches maximum |
| Overall Width | 0.375 |
| Style Designator | Offset mount |
| Surface Treatment | Anodize |
| Tongue Hole Type | Round, unthreaded |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for S280D7. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error