bolts › close tolerance bolts
NAS8602-2
Close Tolerance Bolt
Description
Close Tolerance Bolt
Specifications
| Countersink Angle | Between 99.0 degrees and 101.0 degrees |
|---|---|
| Country of Origin | USA |
| Drive Style | Cross, Phillips |
| Fastener Length | Between 0.433 inches and 0.463 inches |
| Grip | 0.125 in |
| Grip Diameter | Between 0.1625 inches and 0.1635 inches |
| Grip Length | Between 0.115 inches and 0.135 inches |
| Head Angle | 100 º |
| Head Diameter | Between 0.226 inches and 0.257 inches |
| Head Style | Flat countersunk |
| Head Type | Countersunk Reduced |
| Industry Standards/Certification | NAS8602 |
| Internal Drive Style | Cross recess type 1 |
| Length | 0.448 in |
| Material | Steel |
| Material Specification | Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response or ams 6322 assn standard 2nd material response |
| Shear Strength | 95 ksi |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Cl 2 federal specification single treatment response type 2 qq-p-416 |
| Tensile Strength | 160 ksi |
| Thread Class | 3a |
| Thread Diameter | 0.164 |
| Thread Direction | Right-hand |
| Thread Length | 0.323 |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series | UNJC |
| Thread Series Designator | UNJC |
| Thread Size | 0.1640-32 |
| Thread Type | Short Thread |
| Weight | 0.0002 lb |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS8602-2. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error