screws › close tolerance screws
NAS7104-8
Screw
Description
Fastener Length: 15/16", Thread: 1/4-28, Thread Length: 27/64"
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 0.910 inches minimum and 0.940 inches maximum |
| Grip Diameter | 0.2485 inches minimum and 0.2495 inches maximum |
| Grip Length | 0.490 inches minimum and 0.510 inches maximum |
| Head Diameter | 0.456 inches minimum and 0.508 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Cross recess type 1 |
| Length | 15/16 |
| Material | Steel |
| Material Specification | Mil-s-5000 mil spec 1st material response or mil-s-6049gca-6322 mil spec 2nd material response |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Specification Data | 80205-nas7104-8 professional/industrial association standard |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Qq-p-416, ty2 cl2 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.250 |
| Thread Direction | Right-hand |
| Thread Length | 0.425 |
| Thread Qty | 28 |
| Thread Qty Per Inch (tpi) | 28 |
| Thread Series Designator | UNJF |
| Thread Size | 1/4 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- NAS7104-3
- NAS7104-8
- NAS7104-12
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS7104-8. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error