screws › close tolerance screws
NAS7103-8
Close Tolerance Screw
Description
Fastener Length: 7/8", Thread: 10-32, Thread Length: 23/64", fine thread, flat countersunk head, NAS7103 series screw
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 0.850 inches minimum and 0.880 inches maximum |
| Grip Diameter | 0.1885 inches minimum and 0.1895 inches maximum |
| Grip Length | 0.490 inches minimum and 0.510 inches maximum |
| Head Diameter | 0.338 inches minimum and 0.381 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Cross recess type 1 |
| Length | 7/8 |
| Material | Steel |
| Material Specification | Mil-s-5000 mil spec 1st material response or mil-s-6049 mil spec 2nd material response or ams6322 assn std 2nd material response |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.365 |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNJF |
| Thread Size | 10 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- NAS7103-4
- NAS7103-5
- NAS7103-6
- NAS7103-7
- NAS7103-8
- NAS7103-11
- NAS7103-12
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS7103-8. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error