screws › machine screws
NAS662-2R3
Machine Screw
Description
Length: 3/16", Thread: 2-56, Thread Length: 3/16", NAS662 series screw
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 0.156 inches minimum and 0.188 inches maximum |
| Head Diameter | 0.156 inches minimum and 0.172 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Cross recess type 1 |
| Length | 3/16 |
| Material | Steel |
| Min. Tensile Strength (psi) | 55000 pounds per square inch |
| Screw Material | Steel comp 1010 |
| Screw Material Specification | Astm a575 assn std 1st material response or astm a576 assn std single material response or astm a108 assn std single material response |
| Screw Surface Treatment | Cadmium and chromate |
| Screw Surface Treatment Specification | Qq-p-416,type 2,class 3 fed spec single treatment response |
| Thread Class | 2a |
| Thread Diameter | 0.086 |
| Thread Direction | Right-hand |
| Thread Length | 0.152 inches minimum and 0.188 inches maximum |
| Thread Qty | 56 |
| Thread Qty Per Inch (tpi) | 56 |
| Thread Series Designator | UNC |
| Thread Size | 2 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- NAS662-2R2
- NAS662-2R3
- NAS662-2R7
- NAS662-2R14
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- AN505C2-2 AN #2-56 · 3/16 in · Flat countersunk · Steel
- AN505C2-3 AN #2-56 · 3/16 in · Flat countersunk · Steel
- NAS662C2R3 NAS #2-56 · 3/16 in · Flat countersunk · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error