bolts › shear bolts
NAS6603DH2
Bolt
Description
Fastener Length: 31/64", Hole Diameter: 3/64", Thread: 10-32, Thread Length: 11/32"
Specifications
| Distance From Head Largest Bearing Surface To Shank Hole Center | 0.306 inches nominal first hole |
|---|---|
| Fastener Length | 0.455 inches minimum and 0.485 inches maximum |
| Grip Diameter | 0.115 inches minimum and 0.135 inches maximum |
| Grip Length | 0.052 inches minimum and 0.072 inches maximum |
| Head Height | 0.110 inches minimum and 0.125 inches maximum |
| Head Style | Dished hexagon |
| Hole Configuration Style | Hexagon corners |
| Hole Diameter | 0.046 inches minimum and 0.056 inches maximum |
| Hole Quantity | 3 |
| Hole Type | Drilled |
| Length | 31/64 |
| Material | Steel |
| Material Specification | Mil-s-5626 mil spec single material response or ams 6415 assn std single material response or mil-s-5000 mil spec single material response or mil-s-6049 mil spec single material response |
| Part Name Assigned By Controlling Agency | Navy special project |
| Shank Unthreaded Hole Diameter | 0.070 inches minimum first hole and 0.080 inches maximum first hole |
| Surface Treatment | Cadmium |
| Surface Treatment Specification | Qq-p-416, type ii. class 2 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.345 |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNJF |
| Thread Size | 10 |
| Width Between Flats | 0.367 inches minimum and 0.376 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- NAS6603DH2
- NAS6603DH4
- NAS6603DH5
- NAS6603DH10
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS6603DH2. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error