screws › machine screws
NAS517-4-9
100°; Flush Head Screw
Description
NAS 517-4-9 Close Tolerance Flat Head Screw - 100 Degree
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Country of Origin | USA |
| Fastener Length | 1.016 inches minimum and 1.061 inches maximum |
| Finish | Cadmium per QQ-P-416 Type II Class 2 |
| Grip | 0.562 in |
| Hardness Rating | 36.0 rockwell c minimum and 40.0 rockwell c maximum |
| Head Angle | 100 º |
| Head Diameter | 0.452 inches minimum and 0.510 inches maximum |
| Head Style | Flat Head, Flat countersunk |
| Head Type | Flat |
| Industry Standards/Certification | NAS517 |
| Internal Drive Style | Cross recess type 1 |
| Length | 1 3/64, 1.031 |
| Material | Steel |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| NIIN | 00-207-3741 |
| NSN | 5305-00-207-3741 |
| Screw Material | Steel comp 8630 |
| Screw Material Specification | Mil-s-6050 mil spec single material response or an-s-9 mil std single material response |
| Screw Surface Treatment | Cadmium and chromate |
| Screw Surface Treatment Specification | Qq-p-416 ty 2 cl 2 fed spec single treatment response |
| Size | 1/4-28 |
| Sold In | Per Package |
| Thread Class | 3a |
| Thread Diameter | 0.250 |
| Thread Direction | Right-hand |
| Thread Length | 0.368 inches minimum and 0.514 inches maximum |
| Thread Qty | 28 |
| Thread Qty Per Inch (tpi) | 28 |
| Thread Series Designator | UNF |
| Thread Size | 0.2500-28, 1/4 |
| Weight | 0.015 lb |
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS517-4-9. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error