screws › machine screws
NAS517-2-7
100°; Flush Head Screw
Description
NAS 517-2-7 Close Tolerance Flat Head Screw - 100 Degree
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Country of Origin | USA |
| Fastener Length | 0.829 inches minimum and 0.874 inches maximum |
| Finish | Cadmium per QQ-P-416 Type II Class 2 |
| Grip | 0.438 in |
| Hardness Rating | 36.0 rockwell c minimum and 40.0 rockwell c maximum |
| Head Angle | 100 º |
| Head Diameter | 0.287 inches minimum and 0.334 inches maximum |
| Head Style | Flat Head, Flat countersunk |
| Head Type | Flat |
| Industry Standards/Certification | NAS517 |
| Internal Drive Style | Cross recess type 1 |
| Length | .844 Inch, 0.844 in, 55/64 |
| Material | Steel |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| NIIN | 00-206-3708 |
| NSN | 5305-00-206-3708 |
| Screw Material | Steel comp 8630 |
| Screw Material Specification | Mil-s-6050 mil spec single material response or an-s-9 mil std single material response |
| Screw Surface Treatment | Cadmium and chromate |
| Screw Surface Treatment Specification | Qq-p-416 ty 2 cl 3 fed spec single treatment response |
| Size | 8-32 |
| Sold In | Per Package |
| Thread Class | 3a |
| Thread Diameter | 0.164 |
| Thread Direction | Right-hand |
| Thread Length | 0.316 inches minimum and 0.451 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNC |
| Thread Size | 0.1640-32, 8 |
| Weight | .005 lb |
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS517-2-7. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error