nuts › plain hexagon nuts
NAS509L3
Nuts
Description
Nuts
Specifications
| Bearing Surface Finish | 125.0 microinches |
|---|---|
| Bearing Surface Type | Flat |
| Countersink Angle | 110.0 degrees nominal both ends |
| Drilled Hole Diameter | 0.034 inches minimum and 0.039 inches maximum |
| Hardness Rating | 34.0 rockwell c minimum and 38.0 rockwell c maximum |
| Hole Configuration Style | Configuration b |
| Hole Type And Quantity | 3 drilled |
| Material | Steel |
| Material Specification | Mil-s-6758,cond f-4 g41300 mil spec single material response |
| Nut Height | 0.146 inches minimum and 0.166 inches maximum |
| Nut Style | Hexagon |
| Specification Data | 80205-nas509 professional/industrial association standard |
| Surface Treatment | Cadmium |
| Surface Treatment Specification | Qq-p-416,type 2,class 2 fed spec all treatment responses |
| Thread Class | 3b |
| Thread Direction | Right-hand |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series | UNJF |
| Thread Size | 0.190 |
| Weight | .15 lb |
| Width Across Flats | 0.365 inches minimum and 0.377 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS9356-09 MS #10-32 · Iron
- MS9360-09 MS #10-32 · Iron
- MS9881-09 MS #10-32 · Steel
- NAS509L-3C NAS #10-32 · Iron
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error