screws › close tolerance screws
NAS4403-14
Close Tolerance Bolt
Description
Close Tolerance Bolt
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Country of Origin | USA |
| Fastener Length | 1.183 inches minimum and 1.213 inches maximum |
| Grip | 0.875 in |
| Grip Diameter | 0.1885 inches minimum and 0.1895 inches maximum |
| Grip Length | 0.865 inches minimum and 0.885 inches maximum |
| Head Angle | 100 º |
| Head Diameter | 0.338 inches minimum and 0.381 inches maximum |
| Head Style | Flat countersunk |
| Head Type | Countersunk |
| Industry Standards/Certification | NAS4403 |
| Internal Drive Style | Tri-wing recess |
| Length | 1 13/64, 1.198 in |
| Material | Steel |
| Material Specification | Mil-s-5000 mil spec 1st material response and mil-s-6049 mil spec 2nd material response and ams6322 assn std 2nd material response |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Specification Data | 80205-nas4403 professional/industrial association standard |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Qq-p-416 ty2 cl 3 fed spec 1st treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.1900 |
| Thread Direction | Right-hand |
| Thread Length | 0.308 inches minimum and 0.338 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNJF |
| Thread Size | 0.1900-32, 10 |
| Weight | 0.01 lb |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS4403-14. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error