bolts › close tolerance bolts
NAS335CP10
Bolt
Description
Fastener Length: 1-7/64", Thread: 5/16-24, Thread Length: 9/16"
Specifications
| Countersink Angle | 100.0 degrees |
|---|---|
| Fastener Length | 1.077 inches minimum and 1.124 inches maximum |
| Grip Diameter | 0.2483 inches minimum and 0.2492 inches maximum |
| Grip Length | 0.562 |
| Head Diameter | 0.625 inches minimum and 0.635 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Cross recess type ii |
| Length | 1 7/64 |
| Material | Steel |
| Material Specification | Mil-s-5626 mil spec 1st material response or mil-s-5000 mil spec 2nd material response or mil-s-8503 mil spec 3rd material response or mil-s-6098 mil spec 4th material response or mil-s-6049 mil spec 5th material response |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Shank Unthreaded Hole Diameter | 0.076 inches nominal first hole |
| Surface Treatment | Cadmium |
| Surface Treatment Specification | Qq-p-416,type ii,class 2 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.3125 |
| Thread Direction | Right-hand |
| Thread Length | 0.422 inches minimum and 0.572 inches maximum |
| Thread Qty | 24 |
| Thread Qty Per Inch (tpi) | 24 |
| Thread Series Designator | UNJF |
| Thread Size | 5/16 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- NAS335CP10
- NAS335CP12
- NAS335CP13
- NAS335CP16
- NAS335CP25
- NAS335CP56
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS335CP10. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error