bolts › close tolerance bolts
NAS334CP27
Bolt
Description
Fastener Length: 2-15/16", Thread: 1/4-28, Thread Length: 15/32"
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Distance From Head Largest Bearing Surface To Shank Hole Center | 2.562 inches nominal first hole |
| Fastener Length | 2.890 inches minimum and 2.937 inches maximum |
| Grip Diameter | 0.2483 inches minimum and 0.2492 inches maximum |
| Grip Length | 2.500 |
| Hardness Rating | 36.0 rockwell c minimum and 40.0 rockwell c maximum |
| Head Diameter | 0.497 inches minimum and 0.507 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Cross recess type ii |
| Length | 2 15/16 |
| Material | Steel |
| Material Specification | Mil-s-5626 mil spec 1st material response or mil-s-8844 mil spec 2nd material response or ams6414 assn std 2nd material response or mil-s-6-49 mil spec 3rd material response |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Shank Unthreaded Hole Diameter | 0.076 inches nominal first hole |
| Specification Data | 80205-nas334 professional/industrial association standard |
| Surface Finish | 32.0 microinches grip32.0 microinches threads |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Qq-p-416 ty2 cl2 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.250 |
| Thread Direction | Right-hand |
| Thread Length | 0.469 |
| Thread Qty | 28 |
| Thread Qty Per Inch (tpi) | 28 |
| Thread Series Designator | UNJF |
| Thread Size | 1/4 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS334CP27. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error