screws › close tolerance screws
NAS333CP22-5
Screw
Description
Fastener Length: 2-5/16", Thread: 10-32, Thread Length: 7/16"
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Distance From Head Largest Bearing Surface To Shank Hole Center | 3.132 inches minimum first hole and 3.152 inches maximum first hole |
| Fastener Length | 2.265 inches minimum and 2.312 inches maximum |
| Grip Diameter | 0.1885 inches minimum and 0.1894 inches maximum |
| Grip Length | 1.937 |
| Hardness Rating | 36.0 rockwell c minimum and 40.0 rockwell c maximum |
| Head Diameter | 0.376 inches minimum and 0.385 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Cross recess type 1 |
| Length | 2 5/16 |
| Material | Steel |
| Material Specification | Mil-s-5626 mil spec 1st material response or mil-s-8844 mil spec 2nd material response or ams6414 assn std 2nd material response or mil-s-6049 mil spec 3rd material response |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Shank Unthreaded Hole Diameter | 0.060 inches minimum first hole and 0.080 inches maximum first hole |
| Specification Data | 80205-nas333 professional/industrial association standard |
| Surface Finish | 32.0 microinches grip, 32.0 microinches threads |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Qq-p-416,ty 2 cl 2 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.380 inches minimum and 0.447 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNJF |
| Thread Size | 10 |
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS333CP22-5. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error