screws › close tolerance screws
NAS2805-10
Screw
Description
Fastener Length: 1-5/32", Thread: 5/16-24, Thread Length: 1/2"
Specifications
| Countersink Angle | 100.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 1.140 inches minimum and 1.170 inches maximum |
| Grip Diameter | 0.3110 inches minimum and 0.3120 inches maximum |
| Grip Length | 0.615 inches minimum and 0.635 inches maximum |
| Head Diameter | 0.328 |
| Head Style | Flat countersunk |
| Internal Drive Style | Offset cruciform (torque set) |
| Length | 1 5/32 |
| Material | Steel |
| Material Specification | Mil-s-5626 mil spec single material response or mil-s-5000 mil spec single material response or mil-s-6049 mil spec single material response |
| Min. Tensile Strength (psi) | 180000 pounds per square inch |
| Specification Data | 80205-nas2805 professional/industrial association standard |
| Surface Treatment | Cadmium |
| Surface Treatment Specification | Nas672 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.3125 |
| Thread Direction | Right-hand |
| Thread Length | 0.530 |
| Thread Qty | 24 |
| Thread Qty Per Inch (tpi) | 24 |
| Thread Series Designator | UNJF |
| Thread Size | 5/16 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- NAS2805-9
- NAS2805-10
- NAS2805-14
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS2805-10. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error