bolts › close tolerance bolts
NAS1994-3T
Close Tolerance Bolt
Description
Reduced Head Bolt
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Country of Origin | USA |
| Fastener Length | 0.598 inches minimum and 0.628 inches maximum |
| Grip | 0.188 in |
| Grip Diameter | 0.2485 inches minimum and 0.2495 inches maximum |
| Grip Length | 0.178 inches minimum and 0.198 inches maximum |
| Hardness Rating | 39.0 rockwell c minimum and 43.0 rockwell c maximum |
| Head Angle | 100 º |
| Head Diameter | 0.346 inches minimum and 0.399 inches maximum |
| Head Style | Flat countersunk |
| Head Type | Reduced |
| Industry Standards/Certification | NAS1994 |
| Internal Drive Style | Offset cruciform (torque set) |
| Length | 0.613 in, 5/8 |
| Material | Steel |
| Material Specification | Mil-s-5626 mil spec 1st material response or mil-s-5000 mil spec 2nd material response or mi-s-6049 mil spec 3rd material response |
| NIIN | 01-275-3293 |
| NSN | 5305-01-275-3293 |
| Specification Data | 80205-nas1994 professional/industrial association standard |
| Surface Finish | 32.0 microinches grip, 32.0 microinches threads, 63.0 microinches bearing surface of head |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Qq-p-416 ty2 cl2 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.250 |
| Thread Direction | Right-hand |
| Thread Length | 0.400 inches minimum and 0.450 inches maximum |
| Thread Qty | 28 |
| Thread Qty Per Inch (tpi) | 28 |
| Thread Series Designator | UNJF |
| Thread Size | 0.2500-28, 1/4 |
| Weight | .008 lb |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- NAS1994-2T
- NAS1994-3T
- NAS1994-4T
- NAS1994-5T
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS1994-3T. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error