bolts › close tolerance bolts
NAS1993C2T
Close Tolerance Bolt
Description
Reduced Head Bolt
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Country of Origin | USA |
| Fastener Length | 0.448 inches minimum and 0.478 inches maximum |
| Grip Diameter | 0.1881 inches minimum and 0.1887 inches maximum |
| Grip Length | 0.115 inches minimum and 0.135 inches maximum |
| Head Diameter | 0.328 inches minimum and 0.385 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Offset cruciform (torque set) |
| Length | 15/32 |
| Material | Iron |
| Material Specification | Ams 5731 assn std single material response or ams 5737 assn std single material response |
| Min. Tensile Strength (psi) | 180000 pounds per square inch |
| Specification Data | 80205-nas1993 professional/industrial association standard |
| Surface Finish | 32.0 microinches grip, 32.0 microinches threads, 63.0 microinches bearing surface of head |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Qq-p-35 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.313 inches minimum and 0.363 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNJF |
| Thread Size | 10 |
| Weight | 0.003 lb |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- NAS1993C2T
- NAS1993C3T
- NAS1993C4T
- NAS1993C5T
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS1993C2T. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error