bolts › close tolerance bolts
NAS1993-7T
Bolt
Description
Fastener Length: 25/32", Thread: 10-32, Thread Length: 5/16"
Specifications
| Countersink Angle | 100.0 degrees minimum |
|---|---|
| Fastener Length | 0.761 inches minimum and 0.791 inches maximum |
| Grip Diameter | 0.1885 inches minimum and 0.1895 inches maximum |
| Grip Length | 0.428 inches minimum and 0.448 inches maximum |
| Head Diameter | 0.251 inches minimum and 0.305 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Offset cruciform (torque set) |
| Length | 25/32 |
| Material | Steel |
| Material Specification | Mil-s-5626 mil spec 1st material response or mil-s-5000 mil spec 2nd material response or mil-s-8503 mil spec 3rd material response or mil-s-6098 mil spec 4th material response or mil-s-6049 mil spec 5th material response |
| Min. Tensile Strength (psi) | 180000 pounds per square inch |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Qq-p-416 ty 2 cl 3 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.338 |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNJF |
| Thread Size | 10 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- NAS1993-3T
- NAS1993-4T
- NAS1993-5T
- NAS1993-7T
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS1993-7T. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error