bolts › machine bolts
NAS1790-3R6
Bolt
Description
Fastener Length: 11/16", Thread: 10-32, Thread Length: 5/16"
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 0.713 |
| Grip Diameter | 0.189 nominal inches |
| Grip Length | 0.375 nominal inches |
| Head Diameter | 0.339 inches minimum and 0.381 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Offset cruciform (torque set) |
| Length | 11/16 |
| Material | Steel |
| Material Specification | Mil-s-5626, uts g41400 mil spec single material response or ams6415, e4340 (uts g43400) assn std single material response or mil-s-5000, uts g43406 mil spec single material response or mil-s-6049, uts g87400 mil spec single material response |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Part Name Assigned By Controlling Agency | Bolt, 10o degree flush head, 160,000 psi uts |
| Surface Treatment | Cadmium |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.338 |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNJF |
| Thread Size | 10 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS1790-3R6. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error