screws › close tolerance screws
NAS1581F3T2
Close Tolerance Screw
Description
Flush Reduced Head Bolt
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Country of Origin | USA |
| Fastener Length | 0.472 inches minimum and 0.502 inches maximum |
| Finish | Cadmium Per Ams QQ-P-416 TYPE II |
| Grip | 0.125 |
| Grip Diameter | 0.1885 inches minimum and 0.1895 inches maximum |
| Grip Length | 0.115 inches minimum and 0.135 inches maximum |
| Hardness Rating | 36.0 rockwell c minimum and 40.0 rockwell c maximum |
| Head Diameter | 0.258 inches minimum and 0.305 inches maximum |
| Head Style | Flat countersunk |
| Heat Treat | 160,000 - 180,000 PSI |
| Internal Drive Style | Offset cruciform (torque set) |
| Length | 0.487, 1/2 |
| Material | Steel |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| NIIN | 01-057-0345 |
| NSN | 5305-01-057-0345 |
| Specification Data | 80205-nas1581 professional/industrial association standard |
| Surface Finish | 32.0 microinches grip, 32.0 microinches threads |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Qq-p-416 ty 2 cl 2 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.337 inches minimum and 0.387 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNJF |
| Thread Size | 10 |
| Weight | .005 lb |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1581C3T2 NAS #10-32 · 31/64 in · Flat countersunk · CRES
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error