screws › close tolerance screws
NAS1581C3R4P
Close Tolerance Screw
Description
Close Tolerance Screw
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 0.598 inches minimum and 0.628 inches maximum |
| Grip Diameter | 0.1885 inches minimum and 0.1895 inches maximum |
| Grip Length | 0.240 inches minimum and 0.260 inches maximum |
| Head Diameter | 0.258 inches minimum and 0.305 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Offset cruciform (torque set) |
| Material | Iron |
| Material Specification | Ams 5731 assn std single material response or ams 5732 assn std single material response or ams 5737 assn std single material response |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Surface Finish | 32.0 microinches grip, 32.0 microinches threads |
| Surface Treatment | Cadmium |
| Surface Treatment Specification | Qq-p-416, type ii, class 2 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.338 inches minimum and 0.388 inches maximum |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNJF |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- NAS1581C3R2
- NAS1581C3R2P
- NAS1581C3R3
- NAS1581C3R4
- NAS1581C3R4P
- NAS1581C3R6P
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1581C3H4 NAS 5/8 in · Flat countersunk · Iron
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error