bolts › close tolerance bolts
NAS1580V4T29D
Bolt
Description
Fastener Length: 2-11/32", Thread: 1/4-28, Thread Length: 3/8"
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Distance From Head Largest Bearing Surface To Shank Hole Center | 2.225 inches nominal threads |
| Fastener Length | 2.326 inches minimum and 2.356 inches maximum |
| Grip Diameter | 0.2490 inches minimum and 0.2495 inches maximum |
| Grip Length | 1.802 inches minimum and 1.822 inches maximum |
| Head Diameter | 0.464 inches minimum and 0.507 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Offset cruciform (torque set) |
| Length | 2 11/32 |
| Material | Titanium |
| Material Specification | Ams 4828 assn std single material response or ams 4967 assn std single material response |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Shank Unthreaded Hole Diameter | 0.076 inches minimum threads and 0.086 inches maximum threads |
| Specification Data | 80205-nas1580 professional/industrial association standard |
| Thread Class | 3a |
| Thread Diameter | 0.250 |
| Thread Direction | Right-hand |
| Thread Length | 0.403 inches maximum |
| Thread Qty | 28 |
| Thread Qty Per Inch (tpi) | 28 |
| Thread Series Designator | UNJF |
| Thread Size | 1/4 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS1580V4T29D. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error