screws › close tolerance screws
NAS1580V4T14
Close Tolerance Screw
Description
length: 1.278", thread: 1/4-28 shear, flush head bolt - titanium, offset cruciform
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 1.263 inches minimum and 1.293 inches maximum |
| Grip Diameter | 0.2490 inches minimum and 0.2495 inches maximum |
| Grip Length | 0.865 inches minimum and 0.885 inches maximum |
| Head Diameter | 0.464 inches minimum and 0.507 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Offset cruciform (torque set) |
| Length | 1 9/32 |
| Material | Titanium |
| Material Specification | Ams 4967 assn std single material response |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Specification Data | 80205-nas1580 professional/industrial association standard |
| Surface Finish | 32.0 microinches grip, 32.0 microinches threads |
| Thread Class | 3a |
| Thread Diameter | 0.250 |
| Thread Direction | Right-hand |
| Thread Length | 0.378 inches minimum and 0.428 inches maximum |
| Thread Qty | 28 |
| Thread Qty Per Inch (tpi) | 28 |
| Thread Series Designator | UNJF |
| Thread Size | 1/4 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- NAS1580V4T9
- NAS1580V4T14
- NAS1580V4T24
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS1580V4T14. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error