bolts › close tolerance bolts
NAS1580C4R17D
Bolt
Description
Fastener Length: 1-29/64", Thread: 1/4-28, Thread Length: 3/8"
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Distance From Head Largest Bearing Surface To Shank Hole Center | 1.339 inches minimum first hole and 1.359 inches maximum first hole |
| Fastener Length | 1.450 inches minimum and 1.465 inches maximum |
| Grip Diameter | 0.2485 inches minimum and 0.2495 inches maximum |
| Grip Length | 1.052 inches minimum and 1.072 inches maximum |
| Head Diameter | 0.464 inches minimum and 0.506 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Torque-set ribbed |
| Length | 1 29/64 |
| Material | Iron |
| Material Specification | Ams5731 assn std single material response or ams5732 assn std single material response or ams5737 assn std single material response |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Shank Unthreaded Hole Diameter | 0.076 inches minimum first hole and 0.086 inches maximum first hole |
| Specification Data | 80205-nas1580 professional/industrial association standard |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Qq-p-35 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.250 |
| Thread Direction | Right-hand |
| Thread Length | 0.403 |
| Thread Qty | 28 |
| Thread Qty Per Inch (tpi) | 28 |
| Thread Series Designator | UNJF |
| Thread Size | 1/4 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1580C4R17DP NAS 1/4-28 · 0.073 in · Flat countersunk · Iron
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error