screws › close tolerance screws
NAS1580C3T4
Close Tolerance Screw
Description
Flush Reduced Head Bolt
Specifications
| Countersink Angle | Between 99.0 degrees and 101.0 degrees |
|---|---|
| Country of Origin | USA |
| Fastener Length | Between 0.598 inches and 0.628 inches |
| Finish | Passivate Per Ams 2700 |
| Grip | 0.250 |
| Grip Diameter | Between 0.1885 inches and 0.1895 inches |
| Grip Length | Between 0.240 inches and 0.260 inches |
| Head Diameter | Between 0.339 inches and 0.381 inches |
| Head Style | Flat countersunk |
| Heat Treat | 160,000 - 190,000 PSI |
| Internal Drive Style | Offset cruciform (torque set) |
| Length | 0.613, 5/8 |
| Material | Iron |
| Material Specification | Ams 5731 assn standard single material response or ams 5732 assn standard single material response or ams 5737 assn standard single material response |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| NIIN | 01-112-8689 |
| NSN | 5305-01-112-8689 |
| Specification Data | 80205-nas1580 professional/industrial association standard |
| Surface Finish | 32.0 microinches grip, 32.0 microinches threads |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Qq-p-35 federal specification single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | Between 0.338 inches and 0.388 inches |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series | UNJF |
| Thread Series Designator | Unjf (fine thread with external controlled root radius) |
| Thread Size | 10 |
| Weight | .005 lb |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1580C3T4P NAS #10-32 · 5/8 in · Flat countersunk · Iron
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error