bolts › close tolerance bolts
NAS1580A5R15
Bolt
Description
Fastener Length: 1-29/64", Thread: 1/4-24, Thread Length: 33/64"
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 1.424 inches minimum and 1.454 inches maximum |
| Grip Diameter | 0.3110 inches minimum and 0.3120 inches maximum |
| Grip Length | 0.928 inches minimum and 0.948 inches maximum |
| Hardness Rating | 36.0 rockwell c minimum and 40.0 rockwell c maximum |
| Head Diameter | 0.5780 inches minimum and 0.6335 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Offset cruciform (torque set) |
| Length | 1 29/64 |
| Material | Steel |
| Material Specification | Mil-s-5626 mil spec 1st material response or mil-s-5000 mil spec 2nd material response or mil-s-6049 mil spec 3rd material response |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Special Features | Internal drive ribbed |
| Specification Data | 80205-nas1580 professional/industrial association standard |
| Surface Finish | 32.0 microinches grip, 32.0 microinches threads |
| Surface Treatment | Chromate and cadmium |
| Surface Treatment Specification | Qq-p-416 ty 2 cl 2 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.312 |
| Thread Direction | Right-hand |
| Thread Length | 0.476 inches minimum and 0.526 inches maximum |
| Thread Qty | 24 |
| Thread Qty Per Inch (tpi) | 24 |
| Thread Series Designator | UNJF |
| Thread Size | 1/4 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1580A5T15 NAS 1/4-24 · 0.073 in · Flat countersunk · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error