bolts › close tolerance bolts
NAS1580A4T3
Close Tolerance Bolt
Description
Fastener Length: 19/32", Thread: 1/4-28, Thread Length: 27/64
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 0.575 inches minimum and 0.605 inches maximum |
| Grip Diameter | 0.2485 inches minimum and 0.2495 inches maximum |
| Grip Length | 0.177 inches minimum and 0.197 inches maximum |
| Hardness Rating | 36.0 rockwell c minimum and 40.0 rockwell c maximum |
| Head Diameter | 0.464 inches minimum and 0.507 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Torque-set ribbed |
| Length | 19/32 |
| Material | Steel |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Specification Data | 80205-nas1580 professional/industrial association standard |
| Surface Finish | 32.0 microinches bearing surface of head |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Qq-p-416 type 2 class 2 assn std single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.250 |
| Thread Direction | Right-hand |
| Thread Length | 0.378 inches minimum and 0.428 inches maximum |
| Thread Qty | 28 |
| Thread Qty Per Inch (tpi) | 28 |
| Thread Series Designator | UNJF |
| Thread Size | 1/4 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1580A4R3 NAS 1/4-28 · 19/32 in · Flat countersunk · Steel
- NAS1580V4T3 NAS 1/4-28 · 19/32 in · Flat countersunk · Titanium
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error