bolts › close tolerance bolts
NAS1580A4R31D
Bolt
Description
Fastener Length: 2-11/32", Thread: 1/4-28, Thread Length: 3/8"
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Distance From Head Largest Bearing Surface To Shank Hole Center | 2.262 inches minimum first hole and 2.312 inches maximum first hole |
| Fastener Length | 2.326 inches minimum and 2.356 inches maximum |
| Grip Diameter | 0.2485 inches minimum and 0.2495 inches maximum |
| Grip Length | 1.928 inches minimum and 1.948 inches maximum |
| Head Diameter | 0.464 inches minimum and 0.506 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Offset cruciform (torque set) |
| Length | 2 11/32 |
| Material | Steel |
| Material Specification | Mil-s-5626 mil spec single material response and mil-s-5000 mil spec single material response and mil-s-6049 mil spec single material response |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Shank Unthreaded Hole Diameter | 0.076 inches minimum first hole and 0.086 inches maximum first hole |
| Specification Data | 80205-nas1580 professional/industrial association standard |
| Surface Treatment | Cadmium |
| Surface Treatment Specification | Qq-p-416 ty ii cl 2 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.250 |
| Thread Direction | Right-hand |
| Thread Length | 0.403 |
| Thread Qty | 28 |
| Thread Qty Per Inch (tpi) | 28 |
| Thread Series Designator | UNJF |
| Thread Size | 1/4 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1580V4T31D NAS 1/4-28 · 0.086 in · Flat countersunk · Titanium
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error