screws › close tolerance screws
NAS1505-12
Screw
Description
Fastener Length: 1-1/8", Thread: 1/4-24, Thread Length: 25/64"
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 1.110 inches minimum and 1.140 inches maximum |
| Grip Diameter | 0.3110 inches minimum and 0.3120 inches maximum |
| Grip Length | 0.740 inches minimum and 0.760 inches maximum |
| Hardness Rating | 36.0 rockwell c minimum and 40.0 rockwell c maximum |
| Head Diameter | 0.578 inches minimum and 0.633 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | High-torque |
| Length | 1 1/8 |
| Material | Steel |
| Material Specification | Mil-s-5626 mil spec 1st material response or mil-s-5400 mil spec 2nd material response or mil-s-8503 mil spec 3rd material response or mil-s-6098 mil spec 4th material response or mil-s-6049 mil spec 5th material response or mil-s-6758 mil spec 6th material response |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Specification Data | 80205-nas1505 professional/industrial association standard |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Qq-p-416 ty 2 cl 2 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.312 |
| Thread Direction | Right-hand |
| Thread Length | 0.350 inches minimum and 0.400 inches maximum |
| Thread Qty | 24 |
| Thread Qty Per Inch (tpi) | 24 |
| Thread Series Designator | UNJF |
| Thread Size | 1/4 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- NAS1505-10
- NAS1505-11
- NAS1505-12
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS1505-12. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error