screws › socket head cap screws
NAS1352N4H10
Socket Head Screw
Description
Fastener Length: 5/8", Hole Diameter: 3/64", Thread: 1/4-20, Head Width: 3/16", Thread Length: 5/8"
Specifications
| Fastener Length | 0.595 inches minimum and 0.625 inches maximum |
|---|---|
| Head Diameter | 0.365 inches minimum and 0.375 inches maximum |
| Head Height | 0.244 inches minimum and 0.250 inches maximum |
| Head Style | Flat chamfer |
| Hole Configuration Style | Round internal hexagon |
| Hole Diameter | 0.044 inches minimum and 0.050 inches maximum |
| Hole Quantity | 6 |
| Hole Type | Drilled |
| Internal Drive Style | Hexagon |
| Length | 5/8 |
| Material | Iron |
| Material Specification | Ams5731 assn std single material response or ams5737 assn std single material response |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Qq-p-35 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.250 |
| Thread Direction | Right-hand |
| Thread Length | 0.495 inches minimum and 0.625 inches maximum |
| Thread Qty | 20 |
| Thread Qty Per Inch (tpi) | 20 |
| Thread Series Designator | UNRC |
| Thread Size | 1/4 |
| Width Across Flats | 0.187 inches minimum and 0.190 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- NAS1352N4H8
- NAS1352N4H10
- NAS1352N4H10S
- NAS1352N4H20
- NAS1352N4H24
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1352-4H10P NAS 1/4-20 · 5/8 in · Flat chamfer · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error