screws › socket head cap screws
NAS1352-3H10
Socket Head Screw
Description
Fastener Length: 5/8", Hole Diameter: 3/64", Thread: 10-24, Head Width: 5/32", Thread Length: 5/8"
Specifications
| Fastener Length | 0.595 inches minimum and 0.625 inches maximum |
|---|---|
| Hardness Rating | 38.0 rockwell c minimum and 45.0 rockwell c maximum |
| Head Diameter | 0.303 inches minimum and 0.312 inches maximum |
| Head Height | 0.185 inches minimum and 0.190 inches maximum |
| Head Style | Flat chamfer |
| Hole Configuration Style | Round internal hexagon |
| Hole Diameter | 0.044 inches minimum and 0.050 inches maximum |
| Hole Quantity | 6 |
| Hole Type | Drilled |
| Internal Drive Style | Hexagon |
| Length | 5/8 |
| Material | Steel |
| Min. Tensile Strength (psi) | 180000 pounds per square inch |
| Minimum Yield Strength | 155000 pounds per square inch |
| Specification Data | 80205-nas1352 professional/industrial association standard |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.512 inches minimum and 0.625 inches maximum |
| Thread Qty | 24 |
| Thread Qty Per Inch (tpi) | 24 |
| Thread Series Designator | UNRC |
| Thread Size | 10 |
| Width Across Flats | 0.156 inches minimum and 0.159 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- NAS1352-3H8P
- NAS1352-3H10
- NAS1352-3H10P
- NAS1352-3H12P
- NAS1352-3H14P
- NAS1352-3H28
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS24677-24 MS #10-24 · 5/8 in · Flat chamfer · Steel
- NAS1352C3H10 NAS #10-24 · 5/8 in · Flat chamfer · CRES
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error