bolts › close tolerance bolts
NAS1351C3H24
Close Tolerance Bolt
Description
Fastener Length: 1-1/2", Hole Diameter: 3/64", Thread: 10-32, Head Width: 5/32", Thread Length: 1-1/2
Specifications
| Drive Style | Hexagon |
|---|---|
| Fastener Length | 1.500 |
| Head Diameter | Between 0.312 inches and 0.313 inches |
| Head Height | Between 0.185 inches and 0.190 inches |
| Head Style | Flat chamfer |
| Hole Configuration Style | Round internal hexagon |
| Hole Diameter | Between 0.044 inches and 0.050 inches |
| Hole Quantity | 6 |
| Hole Type | Drilled |
| Internal Drive Style | Hexagon |
| Length | 1 1/2 |
| Material | CRES |
| Material Specification | Ff-s-86 federal specification single material response |
| Minimum Yield Strength | 1600 pounds per square inch |
| Specification Data | 80205-nas1351 professional/industrial association standard |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Ff-s-86 federal specification single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.1900 |
| Thread Direction | Right-hand |
| Thread Length | 1.500 |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series | UNF |
| Thread Series Designator | Unf (fine thread) |
| Thread Size | 10 |
| Width Across Flats | Between 0.1562 inches and 0.1587 inches |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- NAS1351C3H16
- NAS1351C3H24
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS1351C3H24. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error