rivets › solid rivets
NAS1241DD6-14
Solid Rivet
Description
Fastener Length: 7/8", NAS1241 series rivet
Specifications
| Countersink Angle | 99.5 degrees minimum and 100.5 degrees maximum |
|---|---|
| Fastener Length | 0.875 |
| Head Major Diameter | 0.349 inches minimum and 0.357 inches maximum |
| Head Style | Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) |
| Material | Aluminum |
| Shank Diameter | 0.1875 |
| Shank Style | Straight w/radius chamfered tip |
| Shear Strength | 330000 single pounds per square inch |
| Surface Treatment | Anodize |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- NAS1241DD6-12
- NAS1241DD6-14
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS20426A6-14 MS 7/8 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Aluminum
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error