screws › machine screws
NAS1219-3E7
Screw
Description
Fastener Length: 29/64", Thread: 10-32, Thread Length: 23/64"
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 0.423 inches minimum and 0.453 inches maximum |
| Head Diameter | 0.344 inches minimum and 0.385 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | High-torque |
| Length | 29/64 |
| Material | Iron |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Screw Material | Iron alloy 660 |
| Screw Material Specification | Ams 5735 assn std single material response |
| Screw Surface Treatment | Passivate |
| Screw Surface Treatment Specification | Qq-p-35 fed spec single treatment response |
| Specification Data | 80205-nas1219 professional/industrial association standard |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.278 inches minimum and 0.370 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNJF |
| Thread Size | 10 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1219-3-7 NAS #10-32 · 29/64 in · Flat countersunk · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error