screws › machine screws
NAS1219-3-10
Machine Screw
Description
Fastener Length: 5/8", Thread: 10-32, Thread Length: 35/64", cadmium
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 0.610 inches minimum and 0.640 inches maximum |
| Hardness Rating | 36.0 rockwell c minimum and 40.0 rockwell c maximum |
| Head Diameter | 0.344 inches minimum and 0.385 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | High-torque |
| Length | 5/8 |
| Material | Steel |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Screw Material | Steel comp 4140 or steel comp e4340 or steel comp 8740 |
| Screw Material Specification | Mil-s-5626 mil spec 1st material response or mil-s-5000 mil spec 2nd material response or mil-s-6049csy-2azjb32.0 mil spec 3rd material response |
| Screw Surface Treatment | Cadmium |
| Screw Surface Treatment Specification | Qq-p-416,ty 1,cl 3 fed spec single treatment response |
| Specification Data | 80205-nas1219 professional/industrial association standard |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.465 inches minimum and 0.557 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNJF |
| Thread Size | 10 |
| Thread Surface Finish | 32.0 microinches |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- NAS1219-3-5
- NAS1219-3-6
- NAS1219-3-7
- NAS1219-3-10
- NAS1219-3-15
- NAS1219-3-15P
- NAS1219-3-16
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1219-3E10 NAS #10-32 · 5/8 in · Flat countersunk · Iron
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error