screws › close tolerance screws
NAS1205-38D
Fine Thread Screw
Description
Fastener Length: 2-3/4", Thread: 1/4-24, Thread Length: 25/64"
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Distance From Head Largest Bearing Surface To Shank Hole Center | 2.606 inches minimum first hole and 2.656 inches maximum first hole |
| Fastener Length | 2.735 inches minimum and 2.765 inches maximum |
| Grip Diameter | 0.3110 inches minimum and 0.3120 inches maximum |
| Grip Length | 2.365 inches minimum and 2.385 inches maximum |
| Hardness Rating | 36.0 rockwell c minimum and 40.0 rockwell c maximum |
| Head Diameter | 0.577 inches minimum and 0.635 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Cross recess type 1 |
| Length | 2 3/4 |
| Material | Steel |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Shank Unthreaded Hole Diameter | 0.076 inches minimum first hole and 0.086 inches maximum first hole |
| Specification Data | 80205-nas1205 professional/industrial association standard |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Qq-p-416 ty 2 cl 2 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.312 |
| Thread Direction | Right-hand |
| Thread Length | 0.350 inches minimum and 0.400 inches maximum |
| Thread Qty | 24 |
| Thread Qty Per Inch (tpi) | 24 |
| Thread Series Designator | UNJF |
| Thread Size | 1/4 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1205-38 NAS 1/4-24 · 0.086 in · Flat countersunk · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error