rivets › solid rivets
NAS1199-3-3
Solid Rivet
Description
Solid Rivet
Specifications
| Countersink Angle | 98.5 degrees minimum and 101.5 degrees maximum |
|---|---|
| Fastener Length | 0.178 inches minimum and 0.198 inches maximum |
| Head Major Diameter | 0.155 inches minimum and 0.190 inches maximum |
| Head Style | Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) |
| Heat Treatment | Quenched or tempered |
| Material | Iron |
| Material Specification | Ams 5737 assn std single material response |
| Shank Diameter | 0.093 inches minimum and 0.097 inches maximum |
| Shank Style | Countersunk (undrilled) |
| Shear Strength | 85000 single pounds per square inch |
| Specification Data | 80205-nas1199 professional/industrial association standard |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Qq-p-35 fed spec single treatment response |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS20426E3-3A MS 0.198 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Aluminum
- MS20427-3C3 MS 0.198 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Steel
- MS20427M3C3 MS 0.198 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Nickel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error