bolts › close tolerance bolts
NAS1189E3T10
Bolt
Description
Fastener Length: 5/8", Thread: 10-32, Thread Length: 17/32"
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 0.594 inches minimum and 0.625 inches maximum |
| Head Diameter | 0.322 inches minimum and 0.385 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Offset cruciform (torque set) |
| Length | 5/8 |
| Material | Iron |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Part Name Assigned By Controlling Agency | Navy special project |
| Specification Data | 80205-nas1189 professional/industrial association standard |
| Surface Finish | 32.0 microinches bearing surface of head, 32.0 microinches threads |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Qq-p-35 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.452 inches minimum and 0.545 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNJF |
| Thread Size | 10 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- NAS1189E3T6B
- NAS1189E3T10
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1189E3P10 NAS #10-32 · 5/8 in · Flat countersunk · Iron
- NAS1189E3T10KH NAS #10-32 · 5/8 in · Flat countersunk · Iron
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error