washers › finishing washers
NAS1169DD6L
Dimpled Washer
Description
Dimpled Washer
Specifications
| Heat Treatment | F-as fabricated |
|---|---|
| Hole Diameter | 0.140 inches minimum and 0.170 inches maximum |
| Material | Aluminum |
| Material Specification | Qq-a-250/5 temper t3 or temper t4 fed spec single material response |
| Material Thickness | 0.016 |
| NIIN | 00-981-3885 |
| NSN | 5310-00-981-3885 |
| Outside Diameter | 0.470 inches minimum and 0.495 inches maximum |
| Recess Angle | 99.0 degrees minimum and 103.0 degrees maximum |
| Shoulder Diameter | 0.279 inches minimum and 0.289 inches maximum |
| Specification Data | 80205-nas1169 professional/industrial association standard |
| Style Designator | Shouldered and recessed |
| Surface Treatment | Anodize |
| Surface Treatment Specification | Mil-a-8625 mil spec single treatment response |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1169-6L NAS #8 · 1/2 in · Steel
- NAS1169C6L NAS #8 · 1/2 in
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error