screws › close tolerance screws
NAS1153V2
Close Tolerance Screw
Description
Fastener Length: 13/32", Thread: 10-32, Thread Length: 1/4", NAS1153 series bolt
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 0.386 inches minimum and 0.416 inches maximum |
| Grip Diameter | 0.1885 inches minimum and 0.1895 inches maximum |
| Grip Length | 0.125 |
| Hardness Rating | 36.0 rockwell c minimum and 40.0 rockwell c maximum |
| Head Diameter | 0.328 inches minimum and 0.385 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Offset cruciform (torque set) |
| Length | 13/32 |
| Material | Titanium |
| Material Specification | Nas 621 assn std single material response |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Specification Data | 80205-nas1153 professional/industrial association standard |
| Surface Finish | 32.0 microinches grip, 32.0 microinches threads |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.276 inches minimum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNJF |
| Thread Size | 10 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1153V2A NAS #10-32 · 13/32 in · Flat countersunk · Titanium
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error