screws › close tolerance screws
NAS1153E4D
Close Tolerance Screw
Description
Fastener Length: 17/32", Hole Diameter: 5/64", Thread: 10-32, Thread Length: 19/64
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 0.511 inches minimum and 0.541 inches maximum |
| Grip Diameter | 0.1885 inches minimum and 0.1895 inches maximum |
| Grip Length | 0.240 inches minimum and 0.260 inches maximum |
| Head Diameter | 0.328 inches minimum and 0.385 inches maximum |
| Head Style | Flat countersunk |
| Hole Configuration Style | Round |
| Hole Diameter | 0.070 inches minimum and 0.080 inches maximum |
| Hole Quantity | 1 |
| Hole Type | Drilled |
| Internal Drive Style | Offset cruciform (torque set) |
| Length | 17/32 |
| Material | Iron |
| Material Specification | Ams5737 assn std single material response |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Specification Data | 80205-nas1153 professional/industrial association standard |
| Surface Finish | 32.0 microinches bearing surface of head, 32.0 microinches grip, 32.0 microinches threads |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Qq-p-35 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.251 inches minimum and 0.301 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNJF |
| Thread Size | 10 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- NAS1153E2
- NAS1153E4
- NAS1153E4D
- NAS1153E4P
- NAS1153E5
- NAS1153E6P
- NAS1153E8
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS1153E4D. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error