screws › machine screws
NAS1153-11D
Screw
Description
Fastener Length: 31/32", Thread: 10-32, Thread Length: 1/4"
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 0.949 inches minimum and 0.979 inches maximum |
| Grip Diameter | 0.188 inches minimum and 0.189 inches maximum |
| Grip Length | 0.688 |
| Head Diameter | 0.328 inches minimum and 0.385 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Offset cruciform (torque set) |
| Length | 31/32 |
| Material | Steel |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Part Name Assigned By Controlling Agency | Screw machine flat 100 degrees head close tolerance short thread offset cruciform 160 ksi (screw close tolerance) |
| Special Features | Item has drilled shank |
| Surface Treatment | Cadmium and chromate |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.276 inches minimum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNJF |
| Thread Size | 10 |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1153-11 NAS #10-32 · 31/32 in · Flat countersunk · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error