screws › close tolerance screws
NAS1152E9
Close Tolerance Screw
Description
Fastener Length: 27/32", Thread: 8-32, Thread Length: 19/64
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 0.823 inches minimum and 0.853 inches maximum |
| Grip Diameter | 0.1625 inches minimum and 0.1635 inches maximum |
| Grip Length | 0.552 inches minimum and 0.572 inches maximum |
| Hardness Rating | 248.0 brinell standard minimum and 341.0 brinell standard maximum |
| Head Diameter | 0.280 inches minimum and 0.337 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Offset cruciform (torque set) |
| Length | 27/32 |
| Material | Iron |
| Material Specification | Ams 5732 assn std single material response |
| Min. Tensile Strength (psi) | 140000 pounds per square inch |
| Surface Finish | 32.0 microinches grip, 32.0 microinches threads |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Qq-p-35 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.164 |
| Thread Direction | Right-hand |
| Thread Length | 0.251 inches minimum and 0.301 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNJC |
| Thread Size | 8 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS1152E9. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error