screws › machine screws
NAS1124-9
Screw
Description
Fastener Length: 57/64", Thread: 1/4-28, Thread Length: 21/64"
Specifications
| Fastener Length | 0.863 inches minimum and 0.893 inches maximum |
|---|---|
| Grip Diameter | 0.2485 inches minimum and 0.2495 inches maximum |
| Grip Length | 0.552 inches minimum and 0.572 inches maximum |
| Hardness Rating | 36.0 rockwell c minimum and 40.0 rockwell c maximum |
| Head Diameter | 0.365 inches minimum and 0.375 inches maximum |
| Head Height | 0.133 inches minimum and 0.150 inches maximum |
| Head Style | Flat chamfer |
| Internal Drive Style | Offset cruciform (torque set) |
| Length | 57/64 |
| Material | Steel |
| Material Specification | Mil-s-5000 mil spec 1st material response or mil-s-5626 mil spec 2nd material response or mil-s-6049 mil spec 3rd material response or mil-s-6098 mil spec 4th material response or mil-s-8503 mil spec 5th material response or ams 6300 assn std 6th material response |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Surface Finish | 32.0 microinches bearing surface of head, 32.0 microinches grip, 32.0 microinches threads |
| Surface Treatment | Cadmium |
| Surface Treatment Specification | Qq-p-416,type 2,class 3 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.250 |
| Thread Direction | Right-hand |
| Thread Length | 0.291 inches minimum and 0.341 inches maximum |
| Thread Qty | 28 |
| Thread Qty Per Inch (tpi) | 28 |
| Thread Series Designator | UNJ |
| Thread Size | 1/4 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- NAS1124-9
- NAS1124-10
- NAS1124-12
- NAS1124-54H
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS1124-9. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error