bolts › close tolerance bolts
NAS1123E2H
Bolt
Description
Fastener Length: 13/32", Hole Diameter: 1/32", Thread: 10-32, Thread Length: 19/64"
Specifications
| Fastener Length | 0.386 inches minimum and 0.416 inches maximum |
|---|---|
| Grip Diameter | 0.1885 inches minimum and 0.1895 inches maximum |
| Grip Length | 0.115 inches minimum and 0.135 inches maximum |
| Hardness Rating | 248.0 brinell standard minimum and 348.0 brinell standard maximum |
| Head Diameter | 0.306 inches minimum and 0.313 inches maximum |
| Head Height | 0.103 inches minimum and 0.118 inches maximum |
| Head Style | Fillister |
| Hole Diameter | 0.038 |
| Internal Drive Style | Offset cruciform (torque set) |
| Length | 13/32 |
| Material | Iron |
| Material Specification | Ams 5737 assn std single material response |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Surface Finish | 32.0 microinches bearing surface of head, 32.0 microinches grip, 32.0 microinches threads |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Qq-p-35 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.251 inches minimum and 0.301 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNJF |
| Thread Size | 10 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS1123E2H. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error