screws › machine screws
NAS1102E4-8
Machine Screw
Description
Fastener Length: 1/2", Thread: 1/4-28, Thread Length: 25/64"
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 0.469 inches minimum and 0.500 inches maximum |
| Head Diameter | 0.442 inches minimum and 0.507 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Torque set |
| Length | 1/2 |
| Material | Iron |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Screw Material | Iron alloy 660 |
| Screw Material Specification | Ams 5737 assn std single material response |
| Screw Surface Treatment | Passivate |
| Screw Surface Treatment Specification | Qq-p-35 fed spec single treatment response |
| Specification Data | 80205-nas1102 professional/industrial association standard |
| Thread Class | 3a |
| Thread Diameter | 0.250 |
| Thread Direction | Right-hand |
| Thread Length | 0.292 inches minimum and 0.394 inches maximum |
| Thread Qty | 28 |
| Thread Qty Per Inch (tpi) | 28 |
| Thread Series Designator | UNJF |
| Thread Size | 1/4 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS514P428-8P NAS 1/4-28 · 1/2 in · Flat countersunk · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error