bolts › close tolerance bolts
NAS1102E3R14
Bolt
Description
Fastener Length: 7/8", Thread: 10-32, Thread Length: 25/32"
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 0.844 inches minimum and 0.875 inches maximum |
| Head Diameter | 0.322 inches minimum and 0.385 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Torque set |
| Length | 7/8 |
| Material | CRES |
| Part Name Assigned By Controlling Agency | Screw, machine, flat 100 degree head, full thread, torque set |
| Screw Material | Steel corrosion resisting |
| Screw Material Specification | A286 per ams 5737 assn std single material response |
| Screw Surface Treatment | Passivate |
| Screw Surface Treatment Specification | Qq-p-35 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.764 inches minimum and 0.795 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNJF |
| Thread Size | 10 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- NAS1102E3R7
- NAS1102E3R10
- NAS1102E3R12
- NAS1102E3R14
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1189E3P14N NAS #10-32 · 7/8 in · Flat countersunk · Iron
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error