screws › machine screws
NAS1102E3-11
Machine Screw
Description
Fastener Length: 11/16", Thread: 10-32, Thread Length: 11/16", NAS1102 series screw
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 0.656 inches minimum and 0.688 inches maximum |
| Hardness Rating | 248.0 brinell standard minimum and 321.0 brinell standard maximum |
| Head Diameter | 0.322 inches minimum and 0.385 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Torque set |
| Length | 11/16 |
| Material | Iron |
| Min. Tensile Strength (psi) | 140000 pounds per square inch |
| Screw Material | Iron alloy 660 |
| Screw Material Specification | Ams 5735 assn std single material response |
| Screw Surface Treatment | Passivate |
| Screw Surface Treatment Specification | Mil-s-5002 mil spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.626 inches minimum and 0.688 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNF |
| Thread Size | 10 |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1102-3-11 NAS #10-32 · 11/16 in · Flat countersunk · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error