screws › machine screws
NAS1102-6-14W
Machine Screw
Description
Fastener Length: 7/8", Thread: 3/8-24, Thread Length: 5/8
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 0.844 inches minimum and 0.875 inches maximum |
| Hardness Rating | 36.0 rockwell c minimum and 40.0 rockwell c maximum |
| Head Diameter | 0.742 inches minimum and 0.762 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Torque set |
| Length | 7/8 |
| Material | Steel |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Screw Material | Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 |
| Screw Material Specification | Mil-s-5626 mil spec 1st material response or mil-s-5000 mil spec 2nd material response or mil-s-8503 mil spec 3rd material response or mil-s-6098 mil spec 4th material response or mil-s-6049 mil spec 5th material response |
| Screw Surface Treatment | Cadmium and chromate |
| Screw Surface Treatment Specification | Qq-p-416 ty 2 cl 3 fed spec single treatment response |
| Specification Data | 80205-nas1102 professional/industrial association standard |
| Thread Class | 3a |
| Thread Diameter | 0.375 |
| Thread Direction | Right-hand |
| Thread Length | 0.632 inches minimum |
| Thread Qty | 24 |
| Thread Qty Per Inch (tpi) | 24 |
| Thread Series Designator | UNJF |
| Thread Size | 3/8 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- NAS1102-6-12
- NAS1102-6-14
- NAS1102-6-14W
- NAS1102-6-22
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1102-6-14 NAS 3/8-24 · 7/8 in · Flat countersunk · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error