screws › machine screws
NAS1102-04-11
Screw
Description
Fastener Length: 11/16", Thread: 4-40, Thread Length: 41/64"
Specifications
| Bearing Surface Of Head Surface Finish | 32.0 microinches |
|---|---|
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
| Fastener Length | 0.656 inches minimum and 0.687 inches maximum |
| Hardness Rating | 36.0 rockwell c minimum and 40.0 rockwell c maximum |
| Head Diameter | 0.177 inches minimum and 0.225 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Torque set |
| Length | 11/16 |
| Material | Steel |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Screw Material | Steel comp 4140 or steel comp 8740 or steel comp e4340 |
| Screw Material Specification | Mil-s-5626 mil spec 1st material response or mil-s-6049 mil spec 2nd material response or mil-s-5000 mil spec 3rd material response |
| Screw Surface Treatment | Cadmium and chromate |
| Screw Surface Treatment Specification | Qq-p-416,type 2,class 2 fed spec single treatment response |
| Specification Data | 80205-nas1102 professional/industrial association standard |
| Thread Class | 3a |
| Thread Diameter | 0.112 |
| Thread Direction | Right-hand |
| Thread Length | 0.562 inches minimum and 0.643 inches maximum |
| Thread Qty | 40 |
| Thread Qty Per Inch (tpi) | 40 |
| Thread Series Designator | UNJC |
| Thread Size | 4 |
| Thread Surface Finish | 32.0 microinches |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1102E04-11 NAS #4-40 · 11/16 in · Flat countersunk · Iron
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error