screws › machine screws
NAS1102-02-8
Screw
Description
Overall Length: 1/2", Thread: 5/64-56, Thread Length: 3/8"
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 0.500 |
| Head Diameter | 0.126 inches minimum and 0.172 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Torque set |
| Length | 1/2 |
| Material | Steel |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Screw Material | Steel comp e4340 or steel comp 8740 or steel comp 8735 or steel comp 6150 or steel comp 4140 or steel comp 4037 |
| Screw Material Specification | Mil-s-5000 mil spec 1st material response or mil-s-6049 mil spec 2nd material response or mil-s-6098 mil spec 3rd material response or mil-s-8503 mil spec 4th material response or mil-s-5626 mil spec 5th material response or ams 6300 assn std 6th material response |
| Screw Surface Treatment | Cadmium and chromate |
| Screw Surface Treatment Specification | Qq-p-416 ty 2 cl 3 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.086 |
| Thread Direction | Right-hand |
| Thread Length | 0.464 inches minimum and 0.500 inches maximum |
| Thread Qty | 56 |
| Thread Qty Per Inch (tpi) | 56 |
| Thread Series Designator | UNC |
| Thread Size | 2 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- AN505-2-8 AN #2-56 · 1/2 in · Flat countersunk · Steel
- NAS662C2R8 NAS #2-56 · 1/2 in · Flat countersunk · CRES
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error